Payment & Shipping Terms:
|Led Didoe:||5050 RGB||LED Color:||RGB|
|LED Light:||Full Color||Lighting Source:||SMD 5050|
|LED Type:||5050 20-22LM||Wattage:||14.4W/m|
|Warranty:||3 Years||Working Voltage:||DC 12V / DC 24V|
|LED Qty:||60led/m||PCB Width:||10mm|
led flexible tape light,
led ribbon tape light
DC 12V / DC 24V 14.4W 60LEDs Per Meter 5050 RGB Full Color Flexible LED Strip Lights
1. Classical flexible RGB strip.
2. Double layer pure copper PCB.
3. 3M adhesive tape ,easy to install.
4. High brightness SMD5050.
5. 120 degree.
6. Strandard 5 meters per roll,cuttable every 6PCS LED at the mark.
7. Flexible and reliable with CE&RoHS
8. Warranty 2 years.
|Item Name||5050 LED RGB strip light|
|Light source||SMD 5050|
|Package||5 meter one roll|
· Cove lighting
· Architectural lights for canopy, archway
· Backlight or edge lighting for signage
· DIY lights for home use
· Path and contour marking
· Decorative lights for holiday, event, show, exhibition, hotel
· The LED RGB strip light itself and all its components may not be mechanically stressed.
· Assembly must not damage or destroy conducting paths on the circuit board.
· Installation of LED ribbon (with power supplies) needs to be made with regard to all applicable electrical and safety standards. Only qualified personnel should be allowed to perform installations.
· Correct electrical polarity needs to be observed. Wrong polarity may destroy the strip.
· Parallel connection is highly recommended as safe electrical operation mode.
· Serial connection is not recommended. Unbalanced voltage drop can cause hazardous overload and damage the strip.
· Please ensure that the power supply is of adapters power to operate the total load.
· When mounting on metallic or otherwise conductive surfaces, there needs to be an electrical isolation points between strip and the mounting surface.
· Pay attention to standard ESD precautions when installing the strip.
· Damaged by corrosion will not be honored as a materials defect claim. It is the user’s responsibility to provide suitable protection against corrosive agents such as moisture and condensation and other harmful elements.
· Caution needs to be taken while doing the connection after cutting the strip. Only authorized professionals can do the work to enable it waterproof in wet locations.
Typical Connectting Diagram
Contact Person: Phenson