|
Product Details:
Payment & Shipping Terms:
|
| Application: | Kitchen | LED Color: | RGB |
|---|---|---|---|
| LED Light: | Full Color | Lighting Source: | SMD 5050 |
| LED Type: | 5050 20-22LM | Wattage: | 15W/m |
| Warranty: | 3 Years | Working Voltage: | 12VDC |
| LED Life: | 50000 Hrs | PCB Width: | 10mm |
| High Light: | led ribbon tape light,flexible led rope lights |
||
Kitchen Cabinet Indoor Color Changing SMD 5050 RGB Flexible LED Strip Lights
Description :
Color your life: This is a RGB Color Changing LED strip. With a controller (which is not included), you can set different static colors, adjust brightness and select various color changing modes. It is widely used for party, wedding etc. It will light up your colorful life.
Idea for DIY: The LED strip can be cut off between every 3LEDs without damaging the rest strip. It comes with two connectors on both ends. You can connect two strips without soldering. It is also soft and flexible. You can bend it to any shape you want.
Humanity design: The LED strip comes with self-adhesive 3M tape on its back, so you can fix it on any dry and flat surface without any screws and clips. Besides, it is covered with clear silicone coating, which protects it very well from water and makes it easy to clean.
Safe to use: The work voltage of the LED strip is 12V DC. It is touchable and safe to children.
Perfect service: No matter what the reason is, if you are not completely satisfied with our LED strip, please contact us and we'll happily issue a full refund or send you a new one.
Product Feature:
Features: Low power consumption,Super-bright but running with low temperature Every 3-LEDS cuttable without damaging the rest strips, according to your requirement Self-adhesive back with Adhesive tape for secure and easy application Dc-plug already soldered on the connector, ready to be plugged in and working.
☆LED Type: High Quality 5050 SMD LED, high intensity and reliability, Long lifespan >50,000 hours
Product specification:
| Color: | RGB 5050 |
| View angle | 120° |
| Working Voltage: 12V DC | 12V DC |
| LED Quantity: 300 leds/5 Meter | 300 leds/5 Meter |
| Working Tempreture:-20 to 50° | 20 to 50° |
| Protection Rate: waterproof | waterproof |
| Luminous Flux: 780-900 Lumens/Meter F | 780-900 Lumens/Meter F |
Package included: 16.4ft/5m 5050 led strip light
Note: Remote Controller and AC adapter not included
Worry-Free Warranty:
At Global dealing shop, we back products all with an 18-month warranty and provide friendly, easy-to-reach support.
LuxLED LED RGB strip lights have been well tested, examined and packaged before sending off, but we cannot 100% guarantee the items remain undamaged when delivered to you. Any problem please feel free to contact us first so that we can supply the best service for you.
If for any reason you are unhappy with any product by our LuxLED LED RGB strip light, please do not hesitate to contact us. We take full ownership and responsibility for the quality of our products and will do our best to solve your problem quickly and efficiently!
Installation Information:
1. There are designated solder pads (marked"+/-") for solder connection. Note that the maximum soldering time is 10 seconds and the highest soldering temperature is 260 degrees.
2. The smallest unit of our SMD5050 LED flexible strip is composed of 3 LEDs. Each unit can be removed by cutting between the designated solder pads.
3. A simpler installation is guaranteed by applying double-sided adhesive tape on the back-surface of the strip.
Notes for applying double-sided adhesive tapes:
(1) Make sure the back-surface of SMD5050 LED flexible strip is clean and dry, thus to guarantee better adhesive effect.
(2) Suitable pressure is needed after flexible strip is positioned. But note that the LED flexible strip itself and all its components may not be mechnically stressed.
(3) The minimum bending radius of our SMD LED flexible strip is 2cm. Smaller bending radium is also possible only if the circuit board containing no electronic components. It would be better to position the LED flexibel strip after bending to avoid cyclic fatigue.
(4) Make sure the adhesive backing is removed completely.
Safety and Maintainance Information
1. SMD LED flexible strip itself and all its components may not be mechanically stressed.
2. Don't damage or destory conducting paths on the circuit board while installation.
3. To guarantee safety, only qualified personnel are allowed to install LED strips.
4. Make sure SMD flexible strips are mounted to correct electrical polarity.
5. Parallel connection is highly recommended for its high safety. Serial connection is not recommended because unbalanced voltage drop may damage SMD LED flexible strips.
6. Insufficient and unstable power supply may cause flexible strip damage.
7. Don't install SMD LED flexible strips directly on metallic or any other conductive surfaces.
8. Pay attention to standard ESD precautions when installing our LED strip lihgts.
Note:
(1) Material corrosion will not be considered as material defect. It's in user's responsibility to provide suitable protection against material corrosion, including protection measures against moisture and condensation, etc.
(2) Connectors are necessary if you want to connect the cut sections together or connect a section to power.
Contact Person: Mr. James
Tel: + 86 13410844021
Fax: 86-755-36607480
| Factory Address:2F,Building 2 Guan Tian Technology park Beihuan Road Shiyan Town Bao an District ShenZhen,Guangdong,China 518108 | |
| Sales office:2F,Building 2 Guan Tian Technology park Beihuan Road Shiyan Town Bao an District ShenZhen,Guangdong,China 518108 | |
| +86--13410844021 | |
| info@ledilluminationlights.com | |
