Payment & Shipping Terms:
|Material:||Ceramic LED||Using:||Grow Light|
|Lead Frame Material:||Ceramic||Watt:||1-3W|
|IF:||350 MA||Size:||3.45* 3.45* 1.95 Mm|
led emitting diode,
light emission diode
Ceramic Lead Frame 3535 Light Emitting Diode For Plants Grow Light Lamp
1. Dimension(length*width*height: mm): 3.45* 3.45* 1.95 mm
2. High Reliability ,longer life time .
3. Low forward voltage .
4. Wavelenth : 430-450nm , 450-460nm ,460-470nm ,620-630nm, 650-660nm
5. Moisture sensitivity level : 5a
6. Pb - free reflow soldering application
7. Rohs compliant
8. 3000pcs per reel
9. High-purity ceramic lead frame, low thermal resistance, good heat dissipation.
10. Automated encapsulation, Molding process, good consistency.
11. Strict reliability test, ESD protection and high reliability.
12. Elastic and close cooperation, module and full wavelength shipment is available.
Plants grow light lamp, animal breeding lighting.
|Part No.||Watt||WD(nm)P(nm)||Voltage (V)||If(mA)||View angle|
1. 1/10 Duty cycle, 0.1ms pulse width.
2. The above forward voltage measurement allowance tolerance is 0.1V.
3. The below color coordinates measurement allowance tolerance is 0.003.
4. the above luminous flux measurement allowance tolerance ±10%.
5. Care is to be taken that power dissipation does not exceed the absolute maximum rating of the product.
6. All measurements were made under the standardized environment of Refond.
7.When the LEDs are in operation the maximum current should be decided after measuring the package temperature,junction temperature should not exceed the maximum rate.LED
Pass the international benchmarking enterprises and third-party SGS social responsibility audit, in line with EICC electronics industry code of conduct requirements.
In line with ROHS, REACH, HF, IEC / EN 62471, LM-80 and other international standards in Third party testing result.
We use scientific research and innovation as a driving force for development, build the core competitiveness of enterprises, is committed to every customer can get more secure, more environmentally friendly products.
Experimental Center was established in 2013, covers an area of over 600 square meters
December 2015 CNAS certification, included in the national laboratory directory. For the company's technological innovation and product development to provide a complete means of testing, product quality management to provide a wealth of reliable test data.
Contact Person: Phenson