WS2813B / WS2813 DC 5V Digital LED Strip Lights Waterproof Slicone Tube RGB Strip

WS2813B / WS2813 DC5V 30LED Waterproof IP67 Slicone Tube RGB LED Strip

Feature :

1. ws2813 led strip, breakpoint continue, one led broken, no affect other the behind led work.

2. One WS2813 IC control ONE LED Chip; Users can cut the ribbon tape every 1 LEDS

3. Each LED is individually addressable, with 8 bits of green, red and blue data shifted in for 24 bit color;

4. With 4pin LED lamps for the digital strip

5. Controller: we usually select SD controller, you also could use DMX controller, DMX decoder, Arduino, Artnet.This product can achieve effects and animations by controller , for example RGB seven colors gradual change, jumping change, Fading , flashing, color chasing, color sliding, Fading, Dimming mode 

6. This is the highest resolution for the moment

7. Controller, Power supply are available

8. For WS2813b IC, we have DC5V; 30/60/96/144 led per meter. Great choice.

9. The product is widely used in building outline lights, entertainment quasi-decorative lighting, advertisement decorative lighting and so on.

10. Low voltage DC power supply safety, Convenience.

WS2813 30LED Addressable LED Strip Light Description :

· WS2813 a new version addressable LED based on WS2812B.

· The advantage is when 1pcs LED burn, the other LED will keep working.

· It’s 5meters in a reel and 30 Pixel/LED per meter cut-able of each unit.

· White & black both color available on surface of

· LED chip and PCB, but our standard one is white LED and White color PCB also.

· DC5V input, suggest inject Power from start and end of the reel.

· 3M adhesive attached on strip, waterproof version IP65,silicon tube coating.

· With a pair of JST SM connector (IP20).

Parameter :

Notes :

· Please read the specifications and precautions carefully before installation

· Please do not use nails or sharp instruments to intall led strip on the object, use double-sided tape or glue or wall mounted on plywood

· Fixed led strip, you can not use acidic glue, it is recommended to use a neutral glue.

· This product is a constant voltage DC5V, make sure Power is right before installation, after installation, check the wiring is correct or not , so that avoid the product been burned

· This product is recommended use in parallel. when the length is more than five meters, the tail so be power to ensure the brightness is enough or uneven

Picture :