Payment & Shipping Terms:
|Package:||5m/reel||Pcb Color:||White /black|
|Voltage:||5V||Lead Frame Color:||White /black|
|LED Type:||5050 Color Change||Color:||Addressable Full Color|
led multicolor strip lights,
programmable led rope lights
Non Waterproof 5m Cutable Magic Color Digital LED Strip Lights 16.4ft 150 WS2812B White PCB
Using a programmable controller , you can program every led just as you like. Every one has its own IC chip.One IC controlls one led.The chip is built in led.
HURT YOUR EYES BRIGHT.
Every led can be cut off,led strip still working after it is cut. Cut it to the length you just need.
They(IP30 ,IP65) has 3M adhensive tape on the back.You can paste it on the bookcase, TV, wine cabinet, ceiling, windowsill easily .IP67 has NO adhesive on its back.
Red ,Green, Blue .Dream full color. curtain-up/ flow water/raindrop/jump flash and so on hundreds of lighting effect, you can also edit animation effect by Coreldraw/Flash/LedEdit software
Life span:more than 50000hrs
|Voltage||DC5V||Drive mode||Constant voltage|
|Input current||60 mA||IP rate||IP 20||------|
|Light source||SMD5050||IP 65||PU/silicone glue|
|LED Qty||30leds/M , 150leds/reel||IP 68||Silicon tube + silicon glue|
|/||/||Back Tape||3M adhesive tape|
|R||620-625nm||Operating temp.||-40~60℃ (-40°F~+140°F)|
|G||520-525nm||Storage temp.||-40~60℃ (-40°F~+140°F)|
●Model: WS2812B 150 pixels LED strip
●Gray level: 256
●View angle: 120°
●Input voltage: DC5V
●Color: full color 24-bit
●FPCB board color:White
●Power:9W/m 0.3W/led 30leds/m
●Standard Reel Length:5meter/roll
●Model: WS2812 strip 5050 Magic RGB Strip
●Operating Temperature:-20 ~ +40°C
●Led Qty: 150pcs RGB SMD 5050 per meter
●Wave length(nm):Red,650nm ; Green,520nm ; Blue,460nm
●Waterproof level:IP20 non-waterproof (IP65 IP68 optional)
●Using voltage DC5V ,higher than 6V will destroy it.
●If you need better led strip performance, you can use an Android/IOS bluetooth controller or a programmable controller K-1000C .
● It is better to add DC5V voltage every 16.4ft, because the LEDs at the far end of the strip might be dimmer due to the added resistance and voltage drop that occurs as the current flows to that end of the strip.
Contact Person: Phenson