Payment & Shipping Terms:
|Package:||5m/reel||Pcb Color:||White /black|
|Voltage:||5V||Lead Frame Color:||White /black|
|LED Type:||5050 Color Change||Color:||Addressable Full Color|
programmable led rope lights,
digitally addressable led strip
WS2812B Programmable Black PCB Digital LED Strip Lights Self Adhesive With CE / RoHS
Light source: 5050 LED
Led Qty: 60pcs per meter
Wave length (NM): R/650nm; G/520nm; B/460nm
IC Model: WS2811 IC built in 5050 SMD
Gray level: 256
Color: full color 24-bit
View angle: 120°
Work Voltage: DC 5V
Power: 0.3W per LED
Waterproof: Not waterproof
FPCB board color: black
LED Chip color: Black
Life span: 50000hrs
|Voltage||DC5V||Drive mode||Constant voltage|
|Input current||60 mA||IP rate||IP 20||------|
|Light source||SMD5050||IP 65||PU/silicone glue|
|Lumen/LED||RGB||IP 67||Silicon tube|
|LED Qty||60leds/M , 300leds/reel||IP 68|
|/||/||Back Tape||3M adhesive tape|
|R||620-625nm||Operating temp.||-40~60℃ (-40°F~+140°F)|
|G||520-525nm||Storage temp.||-40~60℃ (-40°F~+140°F)|
-Individually addressable. The gray levels of each pixel are of 256 levels, 24bit full-color display. You can control each LED individually and set them to any color or animation you want.
-Wide compatibility. It is well compatible with Arduino, Adafruit NeoPixel Library, FastLED library, Raspberry Pi, T1000S, SP103E and SP105E,etc.
-Easy installation. It comes with self-adhesive 3M tape on its back, so you can fix it on any dry and flat surface without any screws and clips.
-Connect freely. It comes with 3-pin JST SM connectors and separated power/ground wires on both ends, which makes it easy to hook up each other and wire up for power.
-It can be used to make led screen, led wall, advertising board and widely applied to hotel, KTV, bars, Outdoor advertising signs, wedding party lighting, and so on.
1) To make it work, you must use a 5V DC power supply and led controller. Please don’t use a 12V/24V power supply, otherwise you can destroy the entire strip.
2)This product requires a compatible controller to function properly. If you don’t know whether your controller can support the led strip, please contact us before you place the order.
3) Led strip is made by 50cm FPCB, so there is a solder point each 50cm on strip. But this minor flaw has no any bad effect on the strip’s performance. In fact, most of the LED strips on the market are manufactured in half-meter lengths.
4) If you want the data sheet of WS2812B, please contact us, we will send it to your email.
Contact Person: Phenson