Payment & Shipping Terms:
|View Angle:||140 Degree||Voltage:||1.8 - 3.4V|
|Color:||White / Green / Blue / Yellow / Red||ESD:||2000V|
|Size:||3.2 * 1.6 * 0.7mm||IF:||20 MA|
smd led diode,
light emission diode
1206 Series Bi - Color / Tri - Color Led Emitting Diode With Small Package
1. Low power consumption,high efficiency, long lifetime.
2. Pure gold wire process for stability security .
3. High temperature resistance, anti-yellowing resistance and UV resistance chip bonding glue .
4. Lead free, RoHS-compliant.
5. Extremely wide viewing angle ,140 degree
6.Suitable for all SMT assembly and solder process.
7. Available on tape and reel.
8. Moisture sensitivity level: 3.
10. RoHS certificate.
11. Cover all colors
The color LED which was fabricated using a yellow / green / orange / blue chip .
1. Switch: the power signal indicator.
2. Network equipment:the signal.
3. Printer: power signal indicator.
4. The projector: power indicator.
Package and size :
Electrical / Optical Characteristics at Ts=25°C
|Part No.||IF (mA)||VF (V)||IV (mcd)||WD(nm)||View angle|
Absolute Maximum Ratings at Ts=25°C
|Peak Forward Current||IFP||60||mA|
|Operating Temperature||Topr||-40 ~ +85||℃|
|Storage Temperature||Tstg||-40 ~ +85||℃|
1. 1/10 Duty cycle, 0.1ms pulse width.
2. The above forward voltage measurement allowance tolerance is 0.1V.
3. The below color coordinates measurement allowance tolerance is 0.003.
4. the above luminous flux measurement allowance tolerance ±10%.
5. Care is to be taken that power dissipation does not exceed the absolute maximum rating of the product.
6. All measurements were made under the standardized environment of Refond.
7.When the LEDs are in operation the maximum current should be decided after measuring the package temperature,junction temperature should not exceed the maximum rate.LED
Pass the international benchmarking enterprises and third-party SGS social responsibility audit, in line with EICC electronics industry code of conduct requirements.
In line with ROHS, REACH, HF, IEC / EN 62471, LM-80 and other international standards in Third party testing result.
We use scientific research and innovation as a driving force for development, build the core competitiveness of enterprises, is committed to every customer can get more secure, more environmentally friendly products.
Experimental Center was established in 2013, covers an area of over 600 square meters
December 2015 CNAS certification, included in the national laboratory directory. For the company's technological innovation and product development to provide a complete means of testing, product quality management to provide a wealth of reliable test data.
Contact Person: Phenson