Payment & Shipping Terms:
|Moisture Sensitivity Level:||5a||SMD Pin Height:||0.55mm(max)|
led emitting diode,
light emission diode
1921 Surface Black Series RGB Light Emitting Diode Using For Display
1.Dimension(length*width*height: mm): 1.9x2.1x1.9
2.Surface not reflective
3. High lumens intensity ,low power dissipation ,long life ,reliable bility .
4.Water -resistant (IPX6)
5.Moisture sensitivity level : 5a
6.Pb - free reflow soldering application
7. Rohs compliant
8. Matte surface
9.SMD pin height:0.55mm(max).
10. Including all black and appearance black encapsulation type.
Widely used in all kinds of surface-mount structure of electronic products, such as car dashboard, Semi outdoor full-color displays, amusement ,indoor and outdoor decorative lighting.
This procuct has an IPX6 grade of waterproof with high contrast(Designed on all black surface) ,light type consistency ,high reliability . It also be widely used for automobile dashboard, semi outdoor full color video screen ,display ,decrotative lighting and other electronic devices.
|Part No.||Color||IF (mA)||IV(mcd)||WD(nm)||VF(V)||View Angle|
1. 1/10 Duty cycle, 0.1ms pulse width.
2. The above forward voltage measurement allowance tolerance is 0.1V.
3. The below color coordinates measurement allowance tolerance is 0.003.
4. the above luminous flux measurement allowance tolerance ±10%.
5. Care is to be taken that power dissipation does not exceed the absolute maximum rating of the product.
6. All measurements were made under the standardized environment of Refond.
7.When the LEDs are in operation the maximum current should be decided after measuring the package temperature,junction temperature should not exceed the maximum rate.LED
Pass the international benchmarking enterprises and third-party SGS social responsibility audit, in line with EICC electronics industry code of conduct requirements.
In line with ROHS, REACH, HF, IEC / EN 62471, LM-80 and other international standards in Third party testing result.
We use scientific research and innovation as a driving force for development, build the core competitiveness of enterprises, is committed to every customer can get more secure, more environmentally friendly products.
Experimental Center was established in 2013, covers an area of over 600 square meters
December 2015 CNAS certification, included in the national laboratory directory. For the company's technological innovation and product development to provide a complete means of testing, product quality management to provide a wealth of reliable test data.
Contact Person: Phenson