Payment & Shipping Terms:
|Sorting Current:||3mA /10mA / 20mA||Moisture Sensitivity Level:||2|
|Brightness:||150 - 2800MCD||Color:||White / Yellow / Orange|
|Viewing Angle:||120 Degree||ESD:||2000v|
|Size:||3.5* 2.8* 1.84 Mm||Feature:||Zener Protection|
led emitting diode,
light emission diode
Automotive Interior 3528 PLCC2 series SMD LED With Zener For LED Back Lighting
1. Dimension(length*width*height: mm): 3.5* 2.8* 1.84 mm
2. Sorting current : 3mA /10mA / 20mA
3. Light color consistency is good, high color gamut
4. High light efficiency, high brightness, high current drive
5. Lead-free package, in line with Rohs
6. Electrostatic Discharge Withstand Voltage Level ≥2000V / ≥8000V(ESD Protection Device).
7. Package 2000pcs/reel
8. PCT lead frame
9. Moisture Sensitivity Level.2
10 Primer process for the gold plating has sulphide protection.
11. With Zener to protect the ESD well .
12. Sample available
13. LCD Backlight
Package Dimmension :
2. Switch & Button
3. Map Lighting
6.LCD Back lighting
The product qualification test plan is based on the guidelines of AEC‐Q101 Stress Test Qualification for Automotive Grade Discrete Semiconductors.Epistar chip .
|Part No.||Mcd||X/Y/WD(nm)||Vf(V)||If (mA)||View angle|
|RF-LIWRA30DS-ED-CZ||400||( 0.165,0.10 )||2.9||10||120°|
|RF-WNRA30DS-ED(1)||2800||( 0.33,0.34 )||3.1||20||120°|
1. Everlight standard
2. The above forward voltage measurement allowance tolerance is 0.1V.
3. The below color coordinates measurement allowance tolerance is 0.003.
4. the above luminous flux measurement allowance tolerance ±10%.
5. Care is to be taken that power dissipation does not exceed the absolute maximum rating of the product.
6. All measurements were made under the standardized environment of Refond.
7.When the LEDs are in operation the maximum current should be decided after measuring the package temperature,junction temperature should not exceed the maximum rate.LED
Pass the international benchmarking enterprises and third-party SGS social responsibility audit, in line with EICC electronics industry code of conduct requirements.
In line with ROHS, REACH, HF, IEC / EN 62471, LM-80 and other international standards in Third party testing result.
We use scientific research and innovation as a driving force for development, build the core competitiveness of enterprises, is committed to every customer can get more secure, more environmentally friendly products.
Experimental Center was established in 2013, covers an area of over 600 square meters
December 2015 CNAS certification, included in the national laboratory directory. For the company's technological innovation and product development to provide a complete means of testing, product quality management to provide a wealth of reliable test data.
Contact Person: Phenson