|
Product Details:
Payment & Shipping Terms:
|
| Case Material: | Plastic | Model Name: | LRS-350 |
|---|---|---|---|
| Output Power: | 350W | Output Type: | Single |
| Input Voltage: | 90 ~ 264VAC 127 ~ 370VDC | Output Voltage: | 12VDC |
| Output Current: | 30mA | The Shell Material: | Metal |
| Warranty: | 5 Years | Demension: | 215*115*30mm(L*W*H) |
| Efficiency: | 85~91.5% | Working Tempera: | -30~+70℃ |
| Output Frequency:: | 47-63HZ | ||
| Highlight: | meanwell led driver,meanwell switching power supply |
||
Meanwell LRS-350-12 Single Output DC Switching Power Supply LED Driver
Technical features
| Model | LRS-350-12 |
| Rated Power | 350W 12v 30a power supply |
| Input Voltage | 85-264VAC |
| Output Voltage | 12VDC (+-10% can be adjust) |
| Protection | Over load,Over voltage, short circuit... |
| Certification | CB UL |
AC input range selectable by switch
Withstand 300VAC surge input for 5 second
Protections: Short circuit / Overload / Over voltage/ Over temperature
Forced air cooling by bulit-in DC fan
Built-in cooling Fan ON-OFF control
LED indicator for power on
100% full load burn-in test
High operating temperature up to 70℃
High efficiency, long life and high reliability
3 years warranty
Specifications
| SPECIFICATION | ||||||||||||||||
| OUTPUT | ||||||||||||||||
| Model | LRS-350-3.3 | LRS-350-5 | LRS-350-12 | LRS-350-15 | LRS-350-24 | LRS-350-36 | LRS-350-48 | |||||||||
| DC Voltage | 3.3V | 5V | 12V | 15V | 24V | 36V | 48V | |||||||||
| Rated Current | 60A | 60A | 29A | 23.2A | 14.6A | 9.7A | 7.3A | |||||||||
| Current Range | 0~60A | 0~60A | 0~29A | 0~23.2A | 0~14.6A | 0~9.7A | 0~7.3A | |||||||||
| Rated Power | 198W | 300W | 348W | 348W | 350.4W | 349.2W | 350.4W | |||||||||
| Ripple & Noise | 150mVp-p | 150mVp-p | 150mVp-p | 150mVp-p | 150mVp-p | 200mVp-p | 200mVp-p | |||||||||
| Voltage Adj. Range | 2.97~3.6V | 4.5 ~ 5.5V | 10~ 13.8V | 13.5~18V | 21.6~28.8V | 32.4~39.6V | 43.2~52.8V | |||||||||
| Voltage Tolerance | ±4.0% | ±3.0% | ±1.5% | ±1.0% | ±1.0% | ±1.0% | ±1.0% | |||||||||
| Line Regulation | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | |||||||||
| Load Regulation | ±2.5% | ±2.0% | ±1.0% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | |||||||||
| Setup, Rise Time | 1300ms, 50ms/230VAC 1300ms, 50ms/115VAC at full load | |||||||||||||||
| Hold Up Time | 16ms/230VAC 12ms/115VAC at full load | |||||||||||||||
| INPUT | ||||||||||||||||
| Voltage Range | 90 ~ 132VAC / 180 ~ 264VAC selected by switch 254 ~ 370VDC (switch on 230VAC) | |||||||||||||||
| Frequency Range | 47 ~ 63Hz | |||||||||||||||
| Efficiency | 79.5% | 83.5% | 85% | 86% | 88% | 88.5% | 89% | |||||||||
| AC Current | 6.8A/115VAC 3.4A/230VAC | |||||||||||||||
| Inrush Current | 60A/115VAC 60A/230VAC | |||||||||||||||
| Leakage Current | <2mA / 240VAC | |||||||||||||||
| PROTECTION | ||||||||||||||||
| Over Load | 110 ~ 140% rated output power | |||||||||||||||
| Protection type: Hiccup mode, recovers automatically after fault condition is removed | ||||||||||||||||
| Over Voltage | 3.8~4.45V | 5.75~6.75V | 13.8 ~ 16.2V | 18~21V | 28.8 ~ 33.6V | 41.4~46.8V | 55.2~ 64.8V | |||||||||
| Protection type: Hiccup mode, recovers automatically after fault condition is removed | ||||||||||||||||
| Over temperature | Hiccup mode, recovers automatically after fault condition is removed | |||||||||||||||
| ENVIRONMENT | ||||||||||||||||
| Working Temp. | -20 ~ +70℃ (Refer to “derating curve”) | |||||||||||||||
| Working Humidity | 20 ~ 90% RH non-condensing | |||||||||||||||
| Storage Temp., Humidity | -40 ~ +85℃, 10 ~ 95% RH | |||||||||||||||
| Temp. Coefficient | ±0.03%/℃ (0 ~ 50℃) | |||||||||||||||
| Vibration | 10 ~ 500Hz, 5G 10min./1cycle, 60min. each along X, Y, Z axes | |||||||||||||||
| SAFETY | ||||||||||||||||
| Safety Standards | UL60950-1 approved | |||||||||||||||
| Withstand Voltage | I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC | |||||||||||||||
| Isolation Resistance | I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃ / 70% RH | |||||||||||||||
| OTHERS | ||||||||||||||||
| Dimension | 215*115*30mm (L*W*H) | |||||||||||||||
| Weight | 0.76Kg | |||||||||||||||
| Packing | 15pcs/carton/12.4kg/0.78CUFT | |||||||||||||||
| NOTE | ||||||||||||||||
|
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance: includes set up tolerance, line regulation and load regulation. 4. Line regulation is measured from low line to high line at rated load. 5. Load regulation is measured from 0% to 100% rated load. 6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. 7. Length of set up time is measured at cold first start. Turning ON/OFF the power supply very quickly may lead to increase of the set up time. |
||||||||||||||||
Detailed image
Power Supply FAQ
How do you select suitable MeanWell power supplies and 12v 30a power supply?
A. Select suitable wattage based on customer’s system requirements and application methods. Must also take excess power and driving method into consideration.12v 30a power supply
B. Based on LED power supply’s operating environment select suitable IP level and mechanical type (metal enclosure, plastic enclosure, and open frame PCB) for that environment.
C. Is PFC function required or not? Single stage PFC is only suitable for LED load. Dual stage PFC is suitable for general applications.12v 30a power supply.12v 30a power supply
D. If LED system is based on direct drive, units with adjustable voltage and current should be considered for flexibility in changing voltage/current levels. Dimming function may also come in handy when LED brightness control is preferred.
Contact Person: Mr. James
Tel: + 86 13410844021
Fax: 86-755-36607480
| Factory Address:2F,Building 2 Guan Tian Technology park Beihuan Road Shiyan Town Bao an District ShenZhen,Guangdong,China 518108 | |
| Sales office:2F,Building 2 Guan Tian Technology park Beihuan Road Shiyan Town Bao an District ShenZhen,Guangdong,China 518108 | |
| +86--13410844021 | |
| info@ledilluminationlights.com | |
