2.4GHz Wireless Remote Controlled LED Dimmer Switch , LED Lamp Dimmer Control

Main Description

● Rotary panel 0-10V dimmer, can also be used as dimming RF remote.

● Output 1 channel 0-10V signal, connect with 0/1-10V dimmable driver.

● High voltage AC input, High voltage AC relay output.

● Rotate knob to change brightness, support push and long push operation.

● Smooth dimming and switch without any flickering.

● Great compatibility with a variety of dimming RF remote.

● Adopt 2.4GHz wireless technology, remote distance up to 30m, one dimmer can accept up to 10 remote control.

● Work with WiFi-relay controller after install APP on IOS and Android system.

Technical parameter

● Input voltage: AC85-265V

● Output voltage: AC85-265V

● Output current: Max 3A

● Output signal: 0-10V(20mA)

● Static power: <1W

● Remote distance: 30m

● Work temperature: -30℃~55℃

● Product size: L86×W86×H48.5mm

Match guide

0-10V rotary panel dimmer match with RF remote (Optional)

1. Match: Turn on light, turn off, immediately push the knob for 5s, within 5s, press on/off key or zone key of the RF remote.

2. Delete: Turn on light, turn off, immediately push the knob for 10s, delete all matched RF remote.

3. Multiple zone RF remote only use zone key to match each zone receiver.

Safety information

1. The product shall be installed and serviced by a qualified person. 2. The product is non-waterproof. Please avoid the sun and rain. 3. Good heat dissipation will prolong the working life of the controller, Please ensure good ventilation. 4. Please check if the output voltage of any power supplies used comply with the working voltage of the product. 5. Ensure all wire connections and polarities are correct and secure before applying power to avoid any damages to the LED lights. 6. If a fault occurs please return the product to your supplier. Do not attempt to fix this product by yourself.

Dimension

Wiring Diagram